@article { author = {دولتی, مجید and کارپرورفرد, سیدحسین}, title = {-}, journal = {Iranian Journal of Agriculture Science}, volume = {37}, number = {4}, pages = {-}, year = {2006}, publisher = {}, issn = {}, eissn = {}, doi = {}, abstract = {Conservation tillage is said to be the best solution for control of soil erosion. A new idea for precision planting in conservation tillage is the use of punch planters which can plant through residue covers, slopes and in gravelly soils. These planters not only provide precision depth and space between plants, but also set a suitable bed necessary for good seed emergence. Furthermore, these planters eliminate thinning costs and reduce amount of seed needed per hectare. In the present research a dibble punch planter with pneumatic seed metering device was designed and fabricated. These planters punch holes at equal distances and depths in soil and then place a single seed in each hole and cover it. The laboratory and field tests were conducted to find the effects of forward speed and soil surface conditions on: multiple index, quality of feed index, miss index, precision, percent of holes with seed in them and planting depth means. The laboratory test was conducted in a completely randomized design with six levels of speed in eight replications. The field test was conducted in a 3×5 factorial completely randomized block design with five forward speed levels (1.7, 2.8, 4, 5.5 and 7 km/h) and three soil surface conditions: (tilled, wheat residue covered and notill) with five replications in a gravelly loam soil. According to the results of these experiments the increase of forward speeds resulted in increasing of multiple index, decreasing of quality of feed index, increase of precision, increase of miss index and decreasing the percent of holes with seed in them and somewhat reducing the planting depth means. The experiments indicated that soil surface conditions was not any effect on all parameters and this planter can plant in three soil surface conditions well. Furthermore 5.5 km/h speed was recummended as the best forward speed at the three soil surface conditions.}, keywords = {Corn,precision planter,punch}, title_fa = {ساخت و ارزیابی دقیق‌کار حفره‌ساز بادی جهت کشت ذرت}, abstract_fa = {امروزه خاک‌ورزی حفاظتی به‌عنوان بهترین راه‌حل برای کنترل فرسایش خاک به‌شمار می‌رود. یک ایده جدید برای کشت دقیق بذر در روشهای مختلف خاک‌ورزی حفاظتی، استفاده از کارنده‌های حفره‌ساز است که براحتی می‌توانند در داخل بقایا، زمینهای شیب‌دار و اراضی سنگلاخ کشت نمایند. این کارنده‌ها علاوه بر تامین عمق و فاصله دقیق بذرها، موجب حذف هزینه تنک‌ کردن و کاهش میزان بذر موردنیاز می‌گردند. لذا در تحقیق حاضر اقدام به ساخت یک واحد کارنده حفره‌ساز از نوع بیلچه‌ای (Dibble Punch Planter) با موزع بادی، جهت کشت ذرت، گردید. این کارنده ابتدا حفره‌هایی با فاصله و عمق یکسان در زمین ایجاد نموده، سپس در داخل هر حفره یک بذر قرار می‌دهد و روی آنرا می‌پوشاند. دستگاه پس از ساخت در آزمایشگاه و مزرعه‌ ارزیابی گردید. در ارزیابی آزمایشگاهی که از گریس‌بلت استفاده شد، اثر سطوح مختلف سرعت پیشروی بر شاخص چند‌کاشتی، شاخص کیفیت تغذیه، شاخص نکاشت، دقت و میزان قرارگیری بذرها در درون دایره‌های مشخص شده روی گریس‌بلت مورد بررسی قرار گرفت. در ارزیابی دستگاه در مزرعه، اثر سرعت پیشروی و شرایط سطحی زمین بر شاخص‌های فوق و همچنین میانگین عمق کاشت، مورد بررسی قرار گرفت. برای انجام تحقیق در آزمایشگاه از طرح کاملا تصادفی با 6 سطح سرعت و در 8 تکرار استفاده شد. جهت انجام تحقیق در مزرعه‌ از آزمایش فاکتوریل 5×3 در قالب طرح بلوکهای کامل تصادفی، شامل 5 سطح سرعت(7/1، 8/2، 4، 5/5 و 7 کیلومتر در ساعت) و سه شرایط سطحی زمین (زمین شخم و دیسک خورده، زمین با بقایای گیاهی گندم و زمین خاک‌ورزی نشده) با 5 تکرار در خاک شنی و رسی سنگریزه‌دار استفاده شد. با توجه به نتایج بدست آمده از آزمونها (در مزرعه و آزمایشگاه) بطور خلاصه می‌توان گفت که افزایش سرعت پیشروی باعث افزایش شاخص‌های چندکاشتی، دقت و نکاشت وکاهش شاخص کیفیت تغذیه،میزان قرارگیری بذرها در درون حفره‌ها و میانگین عمق کاشت گردید. همچنین نتایج آزمایش‌ها نشان داد که شرایط زمین روی پارامترهای مورد بررسی تاثیری ندارد ومی‌توان گفت که کارنده در هر سه شرایط زمین مورد آزمایش می‌تواند بخوبی کار کند. بعلاوه سرعت پیشروی در هر سه شرایط زمین، 5/5 کیلومتر در ساعت توصیه می‌گردد.}, keywords_fa = {حفره‌ساز,دقیق‌کار,ذرت}, url = {https://jijas.ut.ac.ir/article_17852.html}, eprint = {https://jijas.ut.ac.ir/article_17852_af7f71d3b2890b61c1420a0e360d47fe.pdf} }